fbpx

Press Enter

PROJECT TITLE

    Press Enter

    Loading Events

    « All Events

    • This event has passed.

    NOISE, VIBRATION AND HARSHNESS (NVH) CONSIDERATIONS IN DESIGN AND PREDICTIVE MAINTENANCE

    NOISE, VIBRATION AND HARSHNESS (NVH) CONSIDERATIONS IN DESIGN AND PREDICTIVE MAINTENANCE

    February 17 - February 18

    8500Rs

    INTRODUCTION

    Vibration is one of the most pervasive problems in engineering industry. Time dependent motion related to vibrations is not only a cause for fatigue failures but also lead to undesirable deflection of structures. The latter is of high concern for many machine tools as it directly affects the quality of the output of the machine. In addition, in many situations, excessive vibrations also lead to noise problem in work area. Hence, a good understanding of the phenomenon – its characteristics and means of its control, is essential.

    FOCUS AREAS

    • Phenomena of Vibration and Noise and their characteristics and key physical parameters involved
    • Models of dynamic systems, response of Single Degree of Freedom dynamic system – free and forced undamped, free and forced damped
    • Extract design information (design parameters and their influence on system response) from response equations and curves
    • Time domain and Frequency domain response
    • Extension of vibration characteristics of simple models to real life structures, Multi-degree of freedom systems and structural dynamics
    • Response of dynamic systems to typical forces, response curves
    • Locating sources of vibrations and noise
    • Means of controlling vibrations – source modification, isolation, absorption

     

    Training Link

    Details

    Start:
    February 17
    End:
    February 18
    Cost:
    8500Rs
    Event Category:
    Website:
    https://www.imtmatraining.in

    Organizer

    INDIAN MACHINE TOOL MANUFACTURERS’ ASSOCIATION
    Phone:
    9886331231
    Email:
    mary@imtma.in
    Website:
    http://www.imtmatraining.in

    Venue

    INDIAN MACHINE TOOL MANUFACTURERS’ ASSOCIATION
    @ BIEC, 10th Mile, Tumkur
    Bangalore, Karnataka 562 123 India
    + Google Map
    Phone:
    080 66246902
    Website:
    https://www.imtmatraining.in

    Leave a Reply

  • Trending Events

    1. Machine Tool Design - Metal Cutting SPM

      Machine Tool Design – Metal Cutting SPM

      February 10 - April 4
    2. Design of Hydraulics System

      Design of Hydraulics System

      February 17 - February 21
    3. Maintenance & Trouble Shooting of presses

      Maintenance & Trouble Shooting of presses

      February 20 - February 21
    4. Hands-on Training in Spindle Assembly and Maintenance

      Hands-on Training in Spindle Assembly and Maintenance

      February 24 - February 29
    5. BIW Welding Fixture

      BIW Welding Fixture

      February 24 - February 26